One Control Minimal Series Distro MKII Isolated - tgt11 - tgt11

One Control Minimal Series Distro MKII Isolated

1899 :-
Lagerstatus: I lager
FRI FRAKT FRI FRAKT PÅ DENNA PRODUKT
SNABB SERVICE
Vi skickar samma dag om ordern är lagd innan kl 12:00 CET

14 DAGAR FULL RETURRÄTT
Byt eller pengarna tillbaka

ONE CONTROL / MINIMAL SERIES DISTRO MKII ISOLATED

The Minimal Series Distro MKII Isolated is an isolated power supply that is as compact as possible, but with all outputs completely independent. Despite its compact size, it has 10 DC Outs and can supply power to many effects pedals using the dedicated included adapter. It does not take up much space on your pedalboard, and it supplies power to several effects with ease. One Control's power supplies are designed to be reliable, compact, and easy to use.

It's not uncommon for pedalboards to have multiple digital effects and multi-effects devices these days. Equipped with 4 large output terminals of 500mA to correspond to those effectors that require large current. From these terminals, you can also operate multiple compact pedals using daisy chain cables such as One Control Daisy Chain Five.

It also has four 9V/80mA terminals that can be used to connect low current pedals (analog distortion, etc.) and two 9V/250mA terminals that can be used to connect other effects that use a larger amount of current.

One of them can also be boosted with the SAG knob in the range of 9-18V (125mA at 18V).

In addition, since each power supply terminal is independent, a Y-shaped boost cable is included to combine two 9V terminals and output as 18V. By using this, you can use the two terminals as one 18V terminal and supply power to 18-volt pedals.

Features

  • Compact size and completely independent power supply
  • 10 DC out terminals with high output to low output
  • Large output 500mA terminal that supports digital effects
  • Small output 80mA terminal for optimum operation of analog pedals
  • SAG terminal that can be changed to 9-18V
  • 10 DC cables included
  • Comes with a booster cable that matches the voltage by matching the two terminals

 

Specs

  • 4 x DC9V/500mA outputs
  • 4 x DC9V/80mA outputs
  • 1 x DC9V/250mA outputs
  • 1 x DC9V/250mA to 18V/125mA SAG outputs

*All outputs are center negative.

Accessories:

  • 1 x dedicated 12V/4A adapter
  • 1×15cm LS
  • 3×30cm LS
  • 3×50cm LS
  • 3×70cm LS
  • 1 x Y booster cable
  • Rubber feet
  • Size: 120Wx70Dx35Hmm
  • Weight: Approximately 393g
  • Adapter: DC12V
  • Battery powered:- Control: SAG

 

Läs mer

We've selected shipping to

SVERIGE

[Change country below]